Allied Telesis 613-001480 manual Copy tftp//192.168.1.10/ats94-interim.ros image

Page 13

AT-S94 Version 3.0.0.41 Software Release Notes

2.Download the ats94-Interim image drop to the device via TFTP by using one of the following commands depending on your configuration:

Note

You must substitute the IP address of your local TFTP server.

For a stand alone switch -

Copy tftp://192.168.1.10/ats94-interim.ros image

For a stack configuration -

Copy tftp://192.168.1.10/ats94-interim.ros unit://*/image

3.Before rebooting the stand alone switch or stack, you must change the active image, including each slave switch in the stack. To check the active image for each switch use the following command.

Show bootvar

The resulting display will tell you which image is active on each switch. Depending on your configuration, you can now issue one of the following commands, substituting x and y from the Show bootvar command:

For a stand alone switch -

Boot sys image-y

For each switch in a stack -

Boot sys unit x image-y

Switch the active image for next reboot.

4.Reboot the device. By the end of the reboot process (which may take a few minutes), the interim code drop version will be running on the device, and it will automatically rearrange the FLASH sectors as needed.

5.Obtain the Version 3.0.0.38 software from out ATI web site. See “Management Software Updates” on page 16 to navigate to this file.

6.Download the Version 3.0.0.38 software via TFTP by using one of the following commands depending on your configuration:

For a stand alone switch -

Copy tftp://192.168.1.10/ats94-30038.ros image

For a stack configuration -

Copy tftp://192.168.1.10/ats94-30038.ros unit://*/image

PN 613-001480 Rev A

13

Allied Telesis, Inc.

Image 13
Contents AT-S94 Version AT-8000S Switch Software Release Notes Product Documentation and Software Supported PlatformsResolved Issues New Software FeaturesWhat’s New in Version Operational NotesNew Hardware Features Known IssuesRecommended User Work Around Use DVA instead Version 3.0.0.41 Upgrade Process For a stack configuration Software Installed with Incorrect Bootloader Version History of Resolved IssuesLED Description LED Indication Features Historyˆ Dot1x Legacy compliant CLI Command Description of Functionality ˆ 802.1ab Lldp Following 802.1x feature enhancements will be supportedInterim SW Upgrade Procedure from VersionCopy tftp//192.168.1.10/ats94-interim.ros image Copy tftp//192.168.1.10/s94bv10107.rfb boot Reload Contacting Allied Telesis Online Support Email and Telephone Support Warranty