APC AP9312THi manual Network menu provides access to the configurable network, Settings

Menu Items

Network

Purpose	The Network menu provides access to the configurable network
	settings. Only the Administrator can access the Network menu.
TCP/IP	The TCP/IP section lists the Environmental Monitoring Unit’s start-up
	settings for network service and allows you to configure TCP/IP
	settings.
	.
	Item	Definition
	System IP	The unit’s Internet Protocol address, which is a numeric address
		that the domain name server translates into a domain name.
	Subnet Mask	A 32-bit character string used to select some of the bits from an
		Internet address to route it to the subnet.
	Default Gateway	A device that connects two computer networks that use different
		protocols so that the connected networks can exchange data.
		Default: Router address
	BOOTP	A protocol used to enable a diskless workstation to find its own
		logical IP address at startup.
		Settings: Enabled/Disabled
TFTP/FTP	Use the TFTP/FTP section to control file transfers through the settings
	for the TFTP and FTP Client and FTP Server.
	Client or Server	Item	Definition
	TFTP Client	Remote Server IP:	The network address of the TFTP
			server used for downloads.
	FTP Client	Remote Server IP:	The network address of the FTP
			server used for downloads.
		User Name	The user name for access to the
			FTP server.
		Password:	The password for access to the
			FTP server.
	FTP Server	Access:	Enables or disables FTP server
			access.
		Port:	The TCP/IP port on which the FTP
			server for the unit’s management
			card is located.
			Default: port 21
			Continued on next page

Environmental Monitoring Unit: User’s Guide 12