Managing the Unit
Control Console
Options for using the Control Console
Access to the Control Console
The Control Console provides comprehensive management of the unit by one of the following modes of access:
•Telnet, for remote management
•A serial interface for local management
Only one user at a time may access the Environmental Monitoring Unitt. Serial interface users have precedence over Telnet users, and Telnet users have precedence over Web users.
Use a serial interface to access the Control Console:
1.Use the supplied configuration cable (APC part number 940- 0120) to connect the terminal port to one of the Probe Ports on the Environmental Monitoring Unit.
2.Set the terminal port for the following communication settings:
Baud Rate | 2400 |
|
|
Data Bits | 8 |
|
|
Stop Bits | 1 |
|
|
Parity | None |
|
|
Handshaking | None |
|
|
Local Echo | Off |
|
|
Terminal Type | ANSI (VT100) |
|
|
3.To change the communications settings using HyperTerminal:
a.Make the needed changes.
b.Select Disconnect in the Call menu.
c.Select Connect in the Call menu.
d.Press ENTER
4.Log into the Control Console. (See Logging in on this page.)
Logging in | When prompted, enter the Administrator user name and password (apc, |
| by default, for both). |
| To change the user name, password, or timeout value, see User |
| Manager on page 16. |
| Continued on next page |
Environmental Monitoring Unit: User’s Guide | 4 |