APC AP9312THi manual Managing the Unit with Snmp, Using the OIDs, Humidity values

Page 28

Managing the Unit with SNMP

Using the OIDs

Using monitoring	Use the read-only [mUpsEnviron] OIDs to view temperature and
OIDs	humidity values.

	OID	Function

	mUpsRelativeHumidity	Reports the relative humidity sensed by the probes.

	mUpsAmbientTmperature	Reports the ambient temperature in Celsius, sensed
		by the probes.

Using contact OIDs Use the [mUpsContact] OIDs to view and configure the current contact sensor values.

OID	Function

mUpsContactNumContacts	Lists how many contact sensors the unit uses.

{mUpsContactTable}	Lists the OIDs for each contact sensor:
	contactNumber: Identifies the contact sensor for
	which the other OIDs apply.
	normalState: Defines the contact sensor’s normal
	condition (unknown, open, or closed).
	description: Defines the purpose of the contact
	sensor
	monitoringStatus: Defines whether the contact
	sensor is being monitored
	currentStatus: Identifies the sensor’s current
	condition (unknown, noFault, or fault).

Environmental Monitoring Unit: User’s Guide

24

Image 28

Contents Environmental Monitoring Unit Contents Environmental Monitoring UnitContents Security Features AuthenticationManaging the Unit IntroductionLEDs and the Reset Button Reset button and two LEDs are on the front panelManaging the Unit Environmental Monitoring UnitWeb Interface By default, for both Control ConsoleNavigating the menus Password-Protected User Accounts Account access to ManagementMenus Account TypeMenu Items This section provides information on the following menusTemperature and humidity sensed by up to two probes Menu ItemsEnvironmental Monitoring PurposeConfiguration Status contactsStatus firmware Status section also reports the firmware versionEvents To delete the Event Log, type del event.txt. FTP confirms DeletionEvent Option on the Network menu insteadNetwork menu provides access to the configurable network SettingsNetwork For the Tftp and FTP Client and FTP ServerTelnet Telnet/WebWeb Snmp Console only Email ControlEvents menu instead But the Device Manager can configure only the Environmental SystemMenu User ManagerIdentification Values. The following items are configurableDate/Time Display the current transfer settings File TransferConfigure the User Links Configure the APC LinksTools Links WebHelp Configuring and Using Email Notification Configuring Email RecipientsConfiguring and Using Email Notification Configuring Smtp and DNS SettingsManaging the Unit with Snmp Snmp InterfaceUsing the OIDs Use the read-only mUpsEnviron OIDs to view temperatureManaging the Unit with Snmp Humidity valuesSecurity Features SecurityAuthentication SecurityInterface Security Access MethodsAPC Worldwide Customer Support