APC AP9312THi manual Managing the Unit, LEDs and the Reset Button, Environmental Monitoring Unit

Page 6

Managing the Unit

LEDs and the Reset Button

Front Panel	The reset button and two LEDs are on the front panel of the
Features	Environmental Monitoring Unit.

Descriptions

No.	Feature	Description

!	Reset button	Reinitializes the unit’s network interface.

"	Link-RX/TX LED	Off: The device that connects the unit to the network
		(a router, hub, or concentrator) is off or not
		operating correctly.

		Flashing green: The unit is receiving data packets
		from the network.

#	Status LED	Off: The unit has no power.

		Solid green: The unit has valid network settings.

		Flashing green: The unit does not have valid
		network settings.

		Solid red: A hardware failure has been detected in
		the unit.

		Blinking Red (Slowly): The unit is making BOOTP
		requests.

Environmental Monitoring Unit: User’s Guide

Image 6

Contents Environmental Monitoring Unit Contents Environmental Monitoring UnitContents Security Features AuthenticationManaging the Unit IntroductionManaging the Unit LEDs and the Reset ButtonReset button and two LEDs are on the front panel Environmental Monitoring UnitWeb Interface By default, for both Control ConsoleNavigating the menus Menus Password-Protected User AccountsAccount access to Management Account TypeMenu Items This section provides information on the following menusEnvironmental Monitoring Temperature and humidity sensed by up to two probesMenu Items PurposeStatus firmware ConfigurationStatus contacts Status section also reports the firmware versionEvents Event To delete the Event Log, type del event.txt. FTP confirmsDeletion Option on the Network menu insteadNetwork Network menu provides access to the configurable networkSettings For the Tftp and FTP Client and FTP ServerTelnet/Web TelnetWeb Snmp Email Control Console onlyEvents menu instead Menu But the Device Manager can configure only the EnvironmentalSystem User ManagerValues. The following items are configurable IdentificationDate/Time Display the current transfer settings File TransferTools Configure the User LinksConfigure the APC Links Links WebHelp Configuring and Using Email Notification Configuring Email RecipientsConfiguring and Using Email Notification Configuring Smtp and DNS SettingsManaging the Unit with Snmp Snmp InterfaceManaging the Unit with Snmp Using the OIDsUse the read-only mUpsEnviron OIDs to view temperature Humidity valuesSecurity Features SecurityAuthentication SecurityInterface Security Access MethodsAPC Worldwide Customer Support

Managing the Unit

LEDs and the Reset Button

The reset button and two LEDs are on the front panel of the

Environmental Monitoring Unit.

Descriptions

Feature

Description

Link-RX/TX LED