APC AP9312THi manual Methods, Interface Security Access

Page 31

Security

Authentication continued

	Summary of access The following table describes interfaces and its access methods.
	methods
	methods	Interface	Security Access	Notes
		Interface	Security Access	Notes

		Serial Control	Access is by user name and	Always enabled.
		Console	password.

		Telnet Control	These methods are available:	The user name and password
		Console	• User name and password	are transmitted as plain text.
			• User name and password
			• Selectable server port
			• Server Enable/Disable

		SNMP	These methods are available:	The NMS IP filters allow access
			• Community Name	from designated IP addresses.
			• Community Name	• 159.215.12.1 allows only the
			• NMS IP filters	• 159.215.12.1 allows only the
			• Agent Enable/Disable	NMS with that IP address to
			• Agent Enable/Disable	have access.
			• Four access communities with	have access.
			• Four access communities with	• 159.215.12.255 allows
			read/write/disable capability	• 159.215.12.255 allows
			read/write/disable capability	access for any NMS on the
				access for any NMS on the
				159.215.12 segment.
				• 159.215.255.255 allows
				access for any NMS on the
				159.215 segment.
				• 159.255.255.255 allows
				access for any NMS on the
				159 segment.
				• 0.0.0.0 or 255.255.255.255
				allows access for any NMS.

		FTP Server	These methods are available:	Only the Administrator account
			• User name and password	has access.
			• User name and password
			• Selectable server port
			• Server Enable/Disable

		Web Server	These methods are available:	In basic HTTP authentication
			• User name and password	mode, the user name and
			• User name and password	password are transmitted base-
			• Selectable server port	password are transmitted base-
			• Selectable server port	64 encoded (with no
			• Server Enable/Disable	encryption). MD5 authentication
			• MD5 Authentication option	mode uses a user name and
				password phrase.

Environmental Monitoring Unit: User’s Guide

27

Image 31

Contents Environmental Monitoring Unit Environmental Monitoring Unit ContentsContents Authentication Security FeaturesIntroduction Managing the UnitEnvironmental Monitoring Unit LEDs and the Reset ButtonReset button and two LEDs are on the front panel Managing the UnitWeb Interface Control Console By default, for bothNavigating the menus Account Type Password-Protected User AccountsAccount access to Management MenusThis section provides information on the following menus Menu ItemsPurpose Temperature and humidity sensed by up to two probesMenu Items Environmental MonitoringStatus section also reports the firmware version ConfigurationStatus contacts Status firmwareEvents Option on the Network menu instead To delete the Event Log, type del event.txt. FTP confirmsDeletion EventFor the Tftp and FTP Client and FTP Server Network menu provides access to the configurable networkSettings NetworkTelnet Telnet/WebWeb Snmp Console only Email ControlEvents menu instead User Manager But the Device Manager can configure only the EnvironmentalSystem MenuIdentification Values. The following items are configurableDate/Time File Transfer Display the current transfer settingsLinks Web Configure the User LinksConfigure the APC Links ToolsHelp Configuring Email Recipients Configuring and Using Email NotificationConfiguring Smtp and DNS Settings Configuring and Using Email NotificationSnmp Interface Managing the Unit with SnmpHumidity values Using the OIDsUse the read-only mUpsEnviron OIDs to view temperature Managing the Unit with SnmpSecurity Security FeaturesSecurity AuthenticationMethods Interface Security AccessAPC Worldwide Customer Support