APC AP9312THi manual Web Interface

Page 7

Managing the Unit

Web Interface

System	To access the Web interface, you need one of the following supported
requirements	Web browsers:
	• Internet Explorer 3.0.2 and later
	• Netscape 3.0 and later
	Note: Some Web interface features (data verification, APC Interactive
	Assistant, and MD5 authentication) require that you enable Java
	Script and/or Java. For MD5 to function properly, you must also
	have cookies enabled on your Web browser.

Access to the Web Only one user at a time may access the Environmental Monitoring Unit.

interface	Serial interface users have precedence over Telnet users and Telnet
	users have precedence over Web users.
	In the URL Location field of your Web browser, type http:// followed
	by your unit’s IP address. For example:
	http://170.241.17.51
	Note: Alternatively, you can enter the DNS name (if a DNS server
	entry is configured for the unit’s management card).
	If the unit’s Web port is set to a value other than 80, enter the System IP
	address, a colon and the port value (in this example 8000).
	http://170.241.17.51:8000
Logging in	After entering the Environmental Monitoring Unit’s IP address, press
	ENTER. At the prompts, enter your user name and password (apc by
	default for both).
	Note: To change the user name, password, or time-out value, see
	User Manager on page 16.

Environmental Monitoring Unit: User’s Guide

3

Image 7

Contents Environmental Monitoring Unit Environmental Monitoring Unit ContentsContents Authentication Security FeaturesIntroduction Managing the UnitEnvironmental Monitoring Unit LEDs and the Reset ButtonReset button and two LEDs are on the front panel Managing the UnitWeb Interface Control Console By default, for bothNavigating the menus Account Type Password-Protected User AccountsAccount access to Management MenusThis section provides information on the following menus Menu ItemsPurpose Temperature and humidity sensed by up to two probesMenu Items Environmental MonitoringStatus section also reports the firmware version ConfigurationStatus contacts Status firmwareEvents Option on the Network menu instead To delete the Event Log, type del event.txt. FTP confirmsDeletion EventFor the Tftp and FTP Client and FTP Server Network menu provides access to the configurable networkSettings NetworkTelnet Telnet/WebWeb Snmp Console only Email ControlEvents menu instead User Manager But the Device Manager can configure only the EnvironmentalSystem MenuIdentification Values. The following items are configurableDate/Time File Transfer Display the current transfer settingsLinks Web Configure the User LinksConfigure the APC Links ToolsHelp Configuring Email Recipients Configuring and Using Email NotificationConfiguring Smtp and DNS Settings Configuring and Using Email NotificationSnmp Interface Managing the Unit with SnmpHumidity values Using the OIDsUse the read-only mUpsEnviron OIDs to view temperature Managing the Unit with SnmpSecurity Security FeaturesSecurity AuthenticationMethods Interface Security AccessAPC Worldwide Customer Support