APC AP9470, AP9475, AP9465 installation manual Timer refresh failure

E2017	Timer Fail	Timer refresh failure.
E2018	Prog Timer	Programmable interval timer error.
E2019	Parity Error	Parity error.
E201A	SIO Err	SIO failure.
E201B	Kybd Controller	Keyboard controller failure.
E201C	SMI Init	System management interrupt (SMI) initialization failure.
E201D	Shutdown Test	BIOS shutdown test failure.
E201E	POST Mem Test	BIOS POST memory test failure.
E201F	DRAC Config	Dell remote access controller (DRAC) configuration failure.
E2020	CPU Config	CPU configuration failure.
E2021	Memory Population	Incorrect memory configuration. Memory population order
		incorrect.
E2022	POST Fail	General failure after video.
E2110	MBE Crd # DIMM ## &	One of the DIMMs in the set implicated by "## & ##" has had a
	##	memory multi-bit error (MBE). If no memory card is present,
		the "Crd #" string is left out of the message.
E2111	SBE Log Disable Crd #	The system BIOS has disabled memory single-bit error (SBE)
	DIMM ##	logging, and will not resume logging further SBEs until the
		system is rebooted. "##" represents the DIMM implicated by the
		BIOS. If no memory riser card is present, the "Crd #" string is
		left out of the message.
E2112	Mem Spare Crd # DIMM	The system BIOS has spared the memory because it has
	##	determined that the memory had too many errors. "## & ##"
		represents the DIMM pair implicated by the BIOS. If no
		memory card is present, the "Crd #" string is left out of the
		message.
E2113	Mem Mirror Crd # DIMM	The system BIOS has disabled memory mirroring because it has
	## & ##	determined that one half of the mirror has had too many errors.
		"## & ##" represents the DIMM pair implicated by the BIOS. If
		no memory card is present, the "Crd #" string is left out of the
		message.
E2118	Fatal NB Mem CRC	One of the connections in the Fully Buffered DIMM (FBD)
		memory subsystem link on the Northbound side has failed.
E2119	Fatal SB Mem CRC	One of the connections in the FBD memory subsystem link on
		the Southbound side has failed.
I1910	Intrusion	System cover has been removed.
I1911	>3 ERRs Chk Log	LCD overflow message.
		A maximum of three error messages can display sequentially on
		the LCD. The fourth message displays as the standard overflow
		message.
I1912	SEL Full	System Event Log is full of events, and is unable to log any
		more events.
W1228	ROMB Batt < 24hr	Warns predictively that the RAID battery has less than 24 hours
		of charge left.

InfraStruXure Central Installation Manual 23