APC AP9465, AP9470, AP9475 Communication Connection, Replace the rack doors, Network overview

6.Press up on the slide release latch at the side of each slide to slide the system completely into the rack.

7.Push in and turn the captive thumbscrews on each side of the front chassis panel to secure the system to the rack.

To remove the system from the slide assemblies, press down on the thumbpads of the system locking mechanism, and then pull the system forward.

Replace the rack doors

See the procedures for replacing doors in the documentation provided with your rack.

Caution: Because of the size and weight of the rack cabinet doors, never attempt to remove or install them by yourself.

Communication Connection

Network overview

The InfraStruXure Central server provides for the management of networked APC devices, NetBotz appliances, and other third-party SNMP devices. It connects to both your existing network (Public LAN) and a private network (Private LAN) to manage connected devices.

Set up the Private LAN

Connect a CAT-5 network cable to the network port on each SNMP device

The InfraStruXure Central server can manage any APC device with a network port, as well as third-party SNMP devices.

Note: If you are running PowerChute® Network Shutdown software with an InfraStruXure system’s UPS, that UPS must be connected to the public network.

InfraStruXure Central Installation Manual 7