RuggedCom RS969 manual Product Overview, Ethernet Ports

Page 4

1 Product Overview

The RuggedSwitch™ RS969 is an industrially hardened, fully managed Ethernet switch providing dual fiber optical Gigabit Ethernet ports and eight Fast Ethernet copper ports in an IP65/IP67 rated package for protection against low pressure jets of water (IP65) or temporary immersion in water (IP67). Designed to operate reliably in harsh industrial environments the RS969 provides a high level of immunity to electromagnetic interference and heavy electrical surges typical of environments found in electric utility substations, factory floors or in curb side traffic control cabinets. An operating temperature range of -40°C to +85°C coupled with hazardous location certification and IP65/IP67 rated waterproof packaging allows the RS969 to be placed in virtually any location. The embedded Rugged Operating System (ROS™) provides advanced networking features such as Enhanced Rapid Spanning Tree (eRSTP™), Port Rate Limiting and a full array of intelligent functionality for high network availability and manageability.

Ethernet Ports

•2 - Fiber Optical Gigabit Ethernet Ports (1000BaseX) with:.IP65/IP67 Rated fiber optical connectors (type LC)

•8 - Fast Ethernet Ports (10/100BaseTX) with IP65/IP67 Rated M12 D-code connectors or IP65/IP67 Rated shrouded RJ45 style connectors

•Full compliance with IEEE: 802.3, 802.3u and 802.3z

•Non-blocking, store and forward switching

•Full duplex operation and flow control (IEEE 802.3x)

RuggedRated™ for Reliability in Harsh Environments

•IP67 Rated for protection against immersion in water

•IP66 Rated for protection against high pressure jets of water

•Meets IEEE 1613 (electric utility substations)

•Exceeds IEC 61850-3

(electric utility substations)

•Exceeds IEEE 61800-3 (variable speed drive systems)

•Exceeds IEC 61000-6-2 (generic industrial environment)

•Exceeds NEMA TS-2

(traffic control equipment)

•-40 to +85°C operating temperature (no fans)

•Conformal coated circuit boards (optional)

Universal Power Supply Options

•Fully integrated power supply

•Universal high-voltage range: 88-300VDC or

85-264VAC•Popular low-voltage DC ranges: 12, 24, 48 VDC

•Dual redundant, parallel load-sharing power supplies (option)

•Can be powered from different sources for ultimate redundancy

•Available with M12 or M23 style connectors

•CSA/UL 60950 safety approved to +85°C

Simple Plug and Play Operation

•Automatic learning of up to 8192 MAC addresses

•Auto-negotiation on all 10/100BaseTX ports

•Auto-MDI/MDIX (crossover) on all 10/100BaseTX ports

•LED indicators for link and activity

ROS™ Advanced Network Management

•Enhanced Rapid Spanning Tree (eRSTPTM)

•Quality of Service (802.1p) for real-time traffic

•Port rate limiting: 128kbps to 8Mbps

•VLAN (802.1q) with double tagging

•IGMP Snooping for multicast filtering

•Port configuration, status, statistics, mirroring, security

•Loss of link management on fiber ports

•Web-based, Telnet, CLI management interfaces

•SNMP v2 and RMON

•Rich set of diagnostics with logging and alarms

4

2008 RuggedCom Inc. All rights reserved

Rev104

Image 4
Contents RuggedSwitch RS969 Trademarks  2008 RuggedCom Inc. All rights reserved Rev104Table of Contents Product Overview Ethernet PortsRS969 Family Ports/Connectors Description 1 RS969-M12 with Mini-Change Power Connector2 RS969-RJ45 with M23 Power Connector Activity Comments Installation DIN Rail MountingIngress Protection IP67 Ingress of waterPower Supply Wiring and Grounding Mini power supply connector M23 power supply connectorBoth power supply surge grounds via a removable jumper PS1 Live / + is connected to the positive + terminal ifTerminal for AC inputs or the equipment ground bus for DC Chassis ground screw and the chassis ground connects toTerminal # Description Usage Single AC Power Supply Wiring Examples Single DC Power Supply Wiring Examples Dual Power Supplies DC and AC Inputs DC And AC power supply wiring examples Dielectric Strength Testing Failsafe Alarm Relay Wiring and Specifications Console Port Wiring RS232 over M12 console cable pin-outFast Ethernet Ports Signal Description Pin SignalTechnical Specifications Power Supply SpecificationsFailsafe Relay Specifications Operating EnvironmentTwisted Pair Data Port Specifications Fiber Optical Port SpecificationsIEC 61850-3 Type Tests Ieee 1613 Type Tests IEC Environmental Type TestsMechanical Specifications Parameter Value Comments Agency Approvals Agency Standards CommentsPower 1/unit AccessoriesConsole 1/unit Failsafe 1/unit Ethernet 8/unit LC Fiber Optic 2/unit Warranty