RuggedCom RS969 manual Ieee 1613 Type Tests, IEC Environmental Type Tests

3.7 IEEE 1613 Type Tests

IEEE Test		IEEE 1613	Description		Test Levels
		Clause
C37.90.3	9		ESD	Enclosure Contact	+/- 8kV
				Enclosure Air	+/- 15kV
C37.90.2	8		Radiated RFI	Enclosure ports	35 V/m
				Signal ports	+/- 4kV @ 2.5kHz
C37.90.1	7		Fast Transient	D.C. Power ports	+/- 4kV
				A.C. Power ports	+/- 4kV
				Earth ground ports	+/- 4kV
				Signal ports	2.5kV common mode @ 1MHz
C37.90.1	7		Oscillatory	D.C. Power ports	2.5kV common & differential mode @ 1MHz
				A.C. Power ports	2.5kV common & differential mode @ 1MHz
				Signal ports	5 kV (Failsafe Relay)
C37.90	6		H.V. Impulse	D.C. Power ports	5 kV
				A.C. Power ports	5 kV
				Signal ports	2kV AC(Failsafe Relay)
C37.90	6		Dielectric Strength	D.C. Power ports	2kV AC
				A.C. Power ports	2kV AC

NOTES:

•If the unit contains copper ports the IEEE 1613 conformance is Class 1 (During disturbance errors may occur but recovery is automatic).

•If the unit contains all fiber ports the IEEE 1613 conformance is Class 2 (During disturbance no errors will occur).

3.8 IEC Environmental Type Tests

Test	Description		Test Levels
IEC 60068-2-1	Cold Temperature	Test Ad	-40 deg. C, 16 Hours
IEC 60068-2-2	Dry Heat	Test Bd	+85 deg. C, 16 Hours
IEC 60068-2-30	Humidity (Damp Heat,	Test Db	95% (non-condensing), 55°C, 6 cycles
	Cyclic)
IEC 60255-21-1	Vibration	Tests Fc	2g @ (10-150) Hz
IEC 60255-21-2	Shock	Tests Ea	30g @ 11 ms
IEC 60529 (IPx6)	Ingress Protection	Water Jet	100l/m @ 2.5m as per 14.2.6
IEC 60529 (IPx7)	Ingress Protection	Water Submersion	30 min @ 1m as per 14.2.7
IEC 60529 (IP6x)	Ingress Protection	Dust Talcum	2kg/m3 for 8h as per 13.4

Severity

Levels

N/A

N/A

N/A

Class 2

Class 2

N/A

N/A

Cat. 1&2

23

 2008 RuggedCom Inc. All rights reserved Rev104