3Com 3CR17662-91, 3CR17661-91, 3CR17660-91 Default Users, User Default Access Level Name Password

Configuration Conversion Utility 51

CAUTION: To protect your Switch from unauthorized access, you must change all three default passwords as soon as possible, even if you do not intend to actively manage your Switch.

Table 10	Default Users
User	Default	Access Level
Name	Password
monitor	monitor	monitor
		The user can view all manageable parameters, except
		special/security features, but cannot change any manageable
		parameters
manager	manager	manager

admin (no password)

The user can access and change the operational parameters but not special/security features

security

The user can access and change all manageable parameters

	Use the admin default user name (no password) to login and carry out
	initial Switch setup.
	To set a password for the admin user in the CLI, enter the following from
	system view:
	[S4200G]local-user admin <cr>
	[S4200G-luser-admin]password simple xxxxxxxx
	(where xxxxxxxx is your chosen password).
	Save the configuration in the User View.
	For information on the lost password procedure please refer to the
	Configuration Guide that is supplied with your Switch.
Configuration	The 3Com Switch 4200G Configuration Conversion Utility (CCU) enables
Conversion Utility	you to convert the key configuration parameters from a range of 3Com
	SuperStack II and SuperStack 3 devices to the configuration file format
	used by your Switch 4200G unit. The utility provides conversion for a
	number of Switch features