3Com 3CR17660-91, 3CR17662-91, 3CR17661-91 manual Switch 4200G 48-Port

Page 95

Switch 4200G (48-Port) 95

Switch 4200G (48-Port)

Physical Dimensions

Height: 44 mm (1.7 in.) x Width: 440 mm (17.3 in.) x Depth: 274 mm (10.8 in.)

 

Weight: 4.7kg (10.9 lbs)

 

 

Environmental Requirements

 

Operating Temperature

0 ° to 40 °C (32 ° to 104 °F)

Storage Temperature

–10 ° to +70 °C (14 ° to 158 °F)

Operating Humidity

95% non-condensing

Standards

EN60068 to 3Com schedule (Package testing: paras 2.1, 2.2, 2.30, and 2.32.

 

Operational testing: paras 2.1, 2.2, 2.30 and 2.13).

 

 

Safety

 

Agency Certifications

UL 60950-1, EN 60950-1, CSA 22.2 No. 60950-1, IEC 60950-1.

 

 

EMC

 

Emissions

CISPR 22 Class A, EN55022 Class A, FCC Part 15 Subpart B Class A,

 

ICES-003 Class A, EN61000-3-2, EN61000-3-3.

Immunity

EN 55024

 

 

Heat Dissipation

80 watts maximum (275 BTU/hour maximum)

 

 

Power Supply

 

AC

 

Line Frequency

50/60Hz

Input Voltage

100–240 VAC

Current Rating

2.0A (amps) maximum

 

 

Image 95
Contents 3Com Switch 4200G Family United States Government Legend 3Com Corporation Campus Drive MarlboroughPage Page Contents Installing the Switch Problem Solving PIN -OUTS About this Guide Convention Description ConventionsIcon Description Documentation RelatedDocumentation Pddtechpubscomments@3com.com CommentsIntroducing Hardware Features Switch 4200G About the Switch 4200GCommander Switch 4200G-Front ViewSwitch 4200G 48-Port-front view Status Display Display Mode LED Color Description10/100/1000BASE-T Port LEDs Mode LEDColor Indicates 1000BASE-X Port SFP Port LEDs Rear View DetailSlots Configuration Save Feature Switch 4200G Automatic IP ConfigurationDuplex Mode Rmon AlarmInstalling the Switch Site Package ContentsChoosing a Suitable Inch racks To rack-mount your SwitchFront of the Switch, as shown in Figure Rack-mountingFitting a Bracket for Rack-Mounting Repeat and for the other side of the SwitchSequence Power-upPowered-up and ready for operation Switch 4200GSFP port LEDs on page 54 for a list of suggested solutionsSFP Operation Inserting an SFP Transceiver Remove the plastic protective cover if fittedTransceiver Your SwitchChoosing Correct CablesChoosing the Correct Cables Installing the Switch Setting UP for Management Refer to Setting Up Command Line Interface Management on Methods of Managing a SwitchCommand Line Interface Management System View There are two main views in the CLIUser View Overview Setting UpSnmp Automatic IP Configuration using Dhcp Manual IP ConfigurationManually Configuring IP Information Prerequisites Connecting the Workstation to the SwitchSetting Up the Switch with IP Information Enter interface vlan 1 and Enter Enter the system-viewcommand and EnterWith a Network Using the Web Interface Using Command Line Interface using Telnet Using 3Com Network Director Viewing Automatically Configured IP InformationEnter the default gateway for the Switch Viewing IP Information using the Console Port Interface Management Command LineSSH Setting Up Command Line Interface Management usingChoosing a Browser Setting Up WebInterface 2000 Windows XP Server Over the NetworkWindows Red Hat Setting Up Snmp Management V1 or User Default Access Level Name Password Default UsersSetting UP for Management Problem Solving Indicated by LEDs Solving ProblemsSolving Hardware ProblemsUnit fails, no Snmp fan failure message is received Error message indicating that the SFP transceiver is faultyHow do you obtain a registered IP Address? Solving Communication ProblemsIP Addressing Problem Solving Upgrading Software File list similar to the following is displayed If the recycle-bin is empty the following is displayed To back up the application file on your Switch, enterTo back up the bootrom file on your Switch, enter Command Line Interface Switch Setup 4200G ping aaa.aaa.aaa.aaa Via network portTo download the web management file, enter Type y when promptedTo install the new application code, enter To install the new web management code, enterEnter y to display the following message Following information is displayedUpgrading from Bootrom InterfaceFollowed by a password prompt S3t03010024.zip 3comoscfg.def 3comoscfg.cfg s3t030100s56.app Enter your choice0-3 Select option 3 to display the following Select option 2 to display the followingUpgrading BootromUsing FTP Using TftpUsing XModem Ccccccccccccccccccccccccccccc Upgrading Software Safety Information This must be approved for the country where it is used Power Cord Set-Japan Important Safety InformationImportant Safety Information ’information de Sécurité Importante Schko Dispositif Laser De Classe Vorsicht Das Gerät muß geerdet sein Wichtige SicherheitsinformationenInformación de Seguridad Importante Schuko Importanti Informazioni di Sicurezza Stati Uniti e Ważne informacje o zabezpieczeniach Ważne informacje o zabezpieczeniach Ostrzeżenie Porty światłowodowe-bezpieczeństwo PIN-OUTS Pin Number 10/100 1000 Ethernet Port RJ-45 Pin Assignments10/100 and 1000BASE-T RJ-45 connections Ethernet Port RJ-45 Pin Assignments Appendix B PIN-OUTS Switch 4200G 12-Port Switch 4200G 24-Port Switch 4200G 48-Port Appendix C Technical Specifications Purchase ServicesRegister Your ProductDownloads Access SoftwareTroubleshoot OnlineContact Us US and Canada Telephone Technical Support and Repair Country Telephone NumberLatin America Telephone Technical Support and Repair Numbers IndexSFP Regulatory Notices