3Com NJ220 manual Using Central Configuration Manager

USING THE

4 CENTRAL CONFIGURATION MANAGER

	You should use the Local Configuration Manager to initialize each of the NJ220
	IntelliJacks installed on your network. Once you have completed that step, you can
	manage all of them with the Central Configuration Manager.
	Install this program on any computer on your network you want to use as a
	central management console (See chapter 2, “Installing the Configuration
	Managers” for help). You can use the same machine that has your SNMP-based
	management platform. The Central Configuration Manager will be able to
	configure and manage all of the IntelliJacks that reside on your network.
	We recommend that you keep the Central Configuration Manager (CCM) running
	on your machine. Information such as traps and alerts are sent tot he CCM on a
	periodic basis. If you shut off the machine or close the configuration manager, you
	will not be able to receive this information.
Discovering NJ220	In order to manage the NJ220 IntelliJacks on your network, the Central
Devices on Your	Configuration Manager needs to include them in its database. The easiest way to
Network	add new NJ220 IntelliJacks to the database is to use the device discovery tool
	included in the Central Configuration Manager.
	The first time you run the Central Configuration Manager, it will automatically
	take you to the Discovery window as shown under step two below. To discover
	new devices on your network, run the following steps: