52CHAPTER 4: USING THE CENTRAL CONFIGURATION MANAGER
SNMP Configuration
27Click the SNMP Configuration tab to change the SNMP settings of the NJ220.
28You can either Enable or Disable the “Set” operation of the IntelliJack.
29Configure the “Get” and “Set” Community Strings for SNMP management operations.
30Enable or Disable SNMP Trap with the Set SNMP Trap setting. Once enabled, you have the ability to configure the remaining trap settings.
SNMP provides the ability to send traps (notifications) to a trap destination, such as an SNMP server, when one or more conditions have been met. Traps are network packets that contain data relating to a component of the system sending the trap. When the condition for the trap has been met, the SNMP agent forms an SNMP packet and sends it to the administration application.
•A Cold Start Trap signals the administration application when the IntelliJack does a Cold Start.
•A Link Down Trap signals when the SNMP agent on the IntelliJack has gone to “down” state and is not reachable.
•The Link Up Trap signals when then SNMP agent has gone to the “up” state and is now reachable.