Allied Telesis AT-S112, AT-GS950/16PS manual Static Multicast Address Configuration

Chapter 10: MAC Address Table

Static Multicast Address Configuration

This procedure explains how to set the static multicast feature for each port on the AT-GS950/16PS switch. Before beginning this procedure, you must create an 802.1Q VLAN ID or a Port-Based VLAN Index. For information about defining these parameters, see:

“Tagged VLAN Configuration” on page 157 regarding the 802.1Q VLAN ID parameter.

“Port-Based VLAN Configuration” on page 164 regarding the Port- Based VLAN Index parameter.

To add a static MAC address to the switch, perform the following procedure:

1.From the main menu on the left side of the page, select the Bridge folder.

The Bridge folder expands.

2.From the Bridge folder, select Static Multicast.

The Static Multicast Address Table Page is displayed. See Figure 41.

Figure 41. AT-GS950/16PS Static Multicast Address Table Page

3.Select either the 802.1Q VLAN ID or Port-Based VLAN Index radio button and enter the respective VLAN ID (1-4000) or VLAN Index (1 - 52).

130