Chapter 18: Access Control Configuration

Profile Action

Creating a Profile Action

The Create Profile Action page defines the priority parameters for policing on DSCP (layer 3) and/or class of service (layer 2).

Note

You must enter a Profile Index on this page even if you do not define the Policed-DHCPand Policed-CoSparameters because the Profile Index is a required parameter for creating both the In-Profile and Out-Profile Actions. Refer to “Creating an In-Profile Action” on page 227 and “Creating a Out-Profile Action” on page 231 for more information.

You can create, modify or delete a Profile Action by following the procedures in the following sections:

“Creating a Profile Action,” next

“Modifying Profile Action” on page 225

“Deleting a Profile Action” on page 226

To create a profile action, perform the following procedure:

1.From the main menu on the left side of the page, select the Access Control Config folder.

The Access Control Config folder expands.

2.From the Access Control Config folder, select Profile Action. The Create Profile Action page is displayed in Figure 79.

Figure 79. Create Profile Action Page

224

Page 224
Image 224
Allied Telesis AT-S112, AT-GS950/16PS manual Creating a Profile Action