AT-GS950/16PS Switch Web Interface User’s Guide
4. Change the parameters as required.
Note
See “Create Port List” on page 235 for the definitions of each parameters.
5.Click Apply.
The modified Port List entry is displayed in the table at the bottom of the page of the Create Port List page.
6.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.
Delete Port List To delete a Port List entry, perform the following procedure:
1.From the main menu on the left side of the page, select the Access Control Config folder.
The Access Control Config folder expands.
2.From the Access Control Config folder, select Port List.
An example of the Create Port List page with a Port List table entry is shown in Figure 89 on page 236.
3.From the Create Port List page, identify which Port List table entry that want to delete and click the Delete link in the Action column.
You are prompted with a verification message.
4.Click on the OK button.
The Port List entry is deleted from the Port List table.
5.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.
