AT-GS950/16PS Switch Web Interface User’s Guide
Tagged VLAN Configuration
Create a Tagged
VLAN
On a port, the tag information within a frame is examined when it is received to determine if the frame is qualified as a member of a specific tagged VLAN. If it is, it is eligible to be switched to other member ports of the same VLAN. If it is determined that the frame’s tag does not conform to the tagged VLAN, the frame is discarded.
You can create and delete tagged VLANs by following the procedures in the following sections:
“Create a Tagged VLAN”
“Modify a Tagged VLAN” on page 158
“Delete a Tagged VLAN” on page 160
To create a tagged VLAN, perform the following procedure:
1.From the main menu on the left side of the page, select Bridge. The Bridge folder expands.
2.From the Bridge folder, select VLAN. The VLAN folder expands.
3.From the VLAN folder, select Tagged VLAN.
The
Figure 50. AT-GS950/16PS Tagged VLAN Page
157
