Allied Telesis AT-GS950/16PS, AT-S112 manual Loopback Protection, Chapter

Chapter 9

Loopback Protection

This chapter explains how to configure the Loopback Protection feature for specific ports on the AT-GS950/16PS switch. If the Tx and Rx pairs on the same port are connected, then this feature detects this condition and disables the port for a pre-configured amount of time.

This chapter contains the following topics:

“Configuration” on page 120

“Status” on page 122

Note

To permanently save your new settings or any changes to the configuration file, select Save Configuration to Flash from the main menu on the left side of the page.

119