Modify SNMP
Community
Strings
Delete SNMP
Community
Strings
AT-GS950/16PS Switch Web Interface User’s Guide
5.Click Add.
The values of the new Community Name and User Name are displayed. See Figure 66 for an example.
Figure 66. SNMP Community Table Page Example
6.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.
If you need to modify a Community Table entry, you must first delete the entry by using the procedure below and then re-enter it with the modification by creating a new Community table entry. See “SNMPv1 and SNMPv2c User and Group Names” on page 193.
Use the following procedure to delete a community name of an SNMP community from the Community Table.
1.From the main menu on the left side of the page, select the SNMP folder.
The SNMP folder expands.
2.From the SNMP folder, select Community Table.
The Community Table Page is shown in Figure 65 on page 196.
3.To delete a Community Name, click Delete next to the entry in the table that you want to remove.
The deleted Community Name is no longer displayed in the Community table. No confirmation message is displayed.
4.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.
197
