AT-GS950/16PS Switch Web Interface User’s Guide

SNMPv3 View Names

Creating

SNMPv3 View

Names

The SNMPv3 View names are defined in the SNMP Group Access table and are based on the User and Group Names.You can create and delete View Names with the following procedures:

“Creating SNMPv3 View Names” on page 209

“Modifying SNMPv3 View Names” on page 211

“Deleting SNMPv3 View Names” on page 211

Before you can create an SNMPv3 View name, you must defined a Group Name using the SNMP User/Group page. See “Creating SNMPv3 User and Group Names” on page 206.

Use this procedure to create SNMPv3 View Names.

1.From the main menu on the left side of the page, select the SNMP folder.

The SNMP folder expands.

2.From the SNMP folder, select Group Access Table.

The SNMP Group Access Table page is displayed. See Figure 72.

Figure 72. SNMP Group Access Table

3. Enter the Group Name.

Note

This entry must be pre-defined on the SNMP User/Group page. See “Creating SNMPv3 View Names” on page 209.

4.Enter the Read View Name.

209

Page 209
Image 209
Allied Telesis AT-GS950/16PS, AT-S112 manual Creating SNMPv3 View Names, From the Snmp folder, select Group Access Table