Allied Telesis AT-GS950/16PS SNMPv1 and SNMPv2c User and Group Names, Create User and Group Names

AT-GS950/16PS Switch Web Interface User’s Guide

SNMPv1 and SNMPv2c User and Group Names

SNMPv1 and SNMPv2c User Name and Group Name definitions is the basis for creating SNMP communities. Use the following sections to create and delete User and Group Names:

“Create User and Group Names” on page 193

“Modify User and Group Names” on page 194

“Delete User and Group Names” on page 195

Create User and Group Names

A community string has attributes for controlling who can use the string and what the string allows a network management station to do on the switch.

The AT-S112 Management Software does not provide any default community strings. You must first define an SNMP User and Group Name on the SNMP User/Group page and then define a Community Name on the SNMP Community Table page.

To create an SNMP User and Group Name, perform the following procedure:

1.From the main menu on the left side of the page, select the SNMP folder.

The SNMP folder expands.

2.From the SNMP folder, select SNMP User/Group. The SNMP User/Group Page is displayed in Figure 63.

Figure 63. SNMP User/Group Page

193