Configure the
Advanced RSTP
Port Settings
AT-GS950/16PS Switch Web Interface User’s Guide
Enable - The spanning tree protocol (both RSTP or STP- Compatible) is enabled on the port.
Disabled - The spanning tree protocol (both RSTP or STP- Compatible) is disabled on the port.
Priority - Indicates the port priority. See “Port Priority” on page 64 for more information.
Path Cost - Indicates the Path Cost assigned to each port. For STP, the range is from 0 to 65,535. For RSTP, the range is from 0 to 200,000,000. The Path cost is described in “Path Costs and Port Costs” on page 64.
5.Click Apply for the port you are configuring.
6.To configure all of the ports to the same settings, in the All row, configure one, two, or all of the following settings: STP Status, Priority and Port Cost.
7.Click Apply.
8.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.
To configure the advanced RSTP port settings, perform the following procedure:
1.From the main menu on the left side of the page, select Bridge. The Bridge folder expands.
2.From the Bridge folder, select the Spanning Tree folder. The Spanning Tree folder expands.
3.From the Spanning Tree folder, select the RSTP folder. The RSTP folder expands.
4.From the RSTP folder, select RSTP Advanced Port folder.
The
Figure 23. AT-GS950/16PS RSTP Advanced Port Configuration Page
75
