Allied Telesis AT-S112, AT-GS950/16PS manual 240

Chapter 18: Access Control Configuration

Figure 92. Example of Policy Entry

6.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.

Modify Policy To modify a Policy entry, perform the following procedure:

Note

Before you can modify an entry, you must first enter a Policy - see “Create Policy” on page 238.

1.From the main menu on the left side of the page, select the Access Control Config folder.

The Access Control Config folder expands.

2.From the Access Control Config folder, select Policy.

An example of the Create Policy page with a Policy table entry is shown in Figure 92.

3.Select the table entry that you want to modify and click the Modify link in the Action column.

The Modify Policy page is displayed. See Figure 93 on page 241.

240