Allied Telesis AT-S112, AT-GS950/16PS manual Modify Static Unicast Address

Chapter 10: MAC Address Table

Modify Static Unicast Address

To modify the port assignment of a unicast MAC address in the MAC address table, perform the following procedure:

1.From the main menu on the left side of the page, select the Bridge folder.

2.From the Bridge folder, select Static Unicast.

The Static Unicast Address Table Page is displayed. See Figure 38 on page 126.

3.Select Modify next to the static MAC address that you want to change. The Modify Static Unicast Address Page is displayed.

See Figure 40.

Figure 40. Modify Static Unicast Address Page

4.In the Group Member row, select the check boxes for the ports that you want to include or remove in the Group Member area. Selected ports are indicated with a check mark.

Note

To restore the original group member ports, click Restore.

5.Click Apply.

6.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.

128