Allied Telesis AT-S112, AT-GS950/16PS manual Dhcp Snooping

Appendix B: AT-GS950/16PS Default Parameters

Table 12. AT-S112 Management Software Default Settings (Continued)

Parameter	AT-GS950/16PS	Specifications
	Default Setting
Port Access Control	Nas1	1 - 23 characters
NAS ID
Port Access Control	Disabled	Disabled/Enabled
Port Access Control	Local	Local/Radius
Authentication
Method
Dial-In User Name	none	1 - 23 characters
Dial-In User	none	1 - 23 characters
Password
Dial-In User Dynamic	none	1 - 4000 where 0 means ignore
VLAN
RADIUS Server IP	0.0.0.0	IPv4 address in xxx.xxx.xxx.xxx hex format;
RADIUS Server Port	1812	1 - 65535
RADIUS Accounting	1813	1 - 65535
Port
RADIUS Shared	none	1 - 20 characters
Secret
Destination MAC	none	Rule:
Filter MAC Address		1. Not support Multicast Mac address
		(01:xx:xx:xx:xx:xx)
		2. Not support VRRP Mac address
		(00:00:5E:xx:xx:xx)
		3. First 4 bit must be zero
		4. Address cannot be all zero
		5. Cannot add CPU MAC
		6. Up to 128 MAC Address entries
	DHCP Snooping
General Setting	Disabled	Enabled/Disabled
DHCP Snooping
General Setting	Disabled	Enabled/Disabled
Pass Through Option
82
General Setting	Enabled	Enabled/Disabled
Verify MAC Address

382