AT-GS950/16PS Switch Web Interface User’s Guide
2.From the Tools folder, select Reboot.
The Factory Default Reset/Reboot Page is displayed. See Figure 133 on page 338.
3.Go to the Factory Default Reset section on the upper part of the page. You will find a field called Factory Default Reset. This selection allows you to reset the switch configuration to the factory default settings given in “MSTP Overview” on page 327 by using the Reboot procedures outlined in “Configure Factory Default Values” on
page 340.
4.To disable the factory default reset feature, select Disable on the pull- down menu of the Factory Default Reset field.
The Factory Default Reset/Reboot Page changes to include fields for entering a password. See Figure 134.
Figure 134. Factory Default Reset/Reboot Page with Password Entry
5.In the New Password field, enter a password of up to 12 characters in length. It is case-sensitive. There is not a default password for this field.
Caution
Since you define this password as part of the process of disabling this function, Allied Telesis has no knowledge of it. You are responsible for keeping the password in a safe place. If it is lost, Allied Telesis does not have a way to help you recover it.
6.Re-enter the same password in the Confirm Password field.
7.Click Apply.
The following message is displayed:
By clicking on Accept, the Factory Default Reset function will be Disabled on both the switch management software and the physical front panel ecoFriendly button. If you loose this password, ATI cannot recover it for you.
By Clicking on Cancel, the “Factory Default Reset” function will