Chapter 2: System Configuration
User Interface Timeout
Note
See Chapter 20, “Simple Network Management Protocol SNMPv1 and v2c” on page 263 and Chapter 21, “Simple Network Management Protocol SNMPv3” on page 273 to configure the remaining SNMP parameters.
4.Click Apply located under the Web Server Status Enable/Disable field.
5.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.
To set the Web Idle Timeout, perform the following procedure:
1.From the main menu on the left side of the page, click the System folder.
The System folder expands.
2.From the System folder, select User Interface.
The User Interface Page is displayed. See Figure 10 on page 37.
3.Refer to the bottom portion of the web page. Enter the Web Idle Timeout parameter. The range is from 3 to 60 minutes.
4.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.
38