Chapter 19: RMON

Histories

RMON histories are snapshots of port statistics. They are taken by the switch at predefined intervals and can be used to identify trends or patterns in the numbers or types of ingress packets on the ports on the switch. The snapshots can be viewed with your SNMP NMS software with the history group of the RMON portion of the MIB tree.

A history group is divided into buckets. Each bucket stores one snapshot of statistics of a port. A group can have from 1 to 50 buckets. The more buckets in a group, the more snapshots it can store.

Perform the following procedure to configure RMON history:

1.From the main menu on the left side of the page, click the RMON folder.

The RMON folder expands.

2.From the RMON folder, select History.

The History Control Configuration Page is displayed. See Figure 99.

Figure 99. History Control Configuration Page

3. The following fields are listed:

Index: This parameter specifies the ID number of the new group.

The range is 1 to 65535.

Port: This parameter specifies the port where you want to monitor the statistical information of the Ethernet traffic.

Buckets Requested: This parameter defines the number of snapshots of the statistics for the port. Each bucket can store one

250

Page 250
Image 250
Allied Telesis AT-S112, AT-GS950/16PS manual Histories