Allied Telesis AT-GS950/16PS, AT-S112 manual Modifying Profile Action

Modifying Profile Action

AT-GS950/16PS Switch Web Interface User’s Guide

3.Enter a number in the Profile Action Index field.

The Index must be a unique number ranging from 1 to 72.

4.Enter a number in the Policed DSCP field within the range of 0 to 63. This field indicates the DSCP level of interest. This field is not mandatory and you may elect to leave it blank.

5.Enter a number in the Policed-CoSfield ranging from 0 to 7. This field indicates the CoS level of interest. This field is not mandatory and you may elect to leave it blank.

6.Click Add.

The Profile Action is added to the status table. If you do not see you new entry, you may need to navigate to another page of the table with the First Page, Previous Page, Next Page, and Last Page buttons located below the table. An example of a Profile Action table entry is displayed in Figure 80.

Figure 80. Example of Profile Action Entry

7.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.

To modify a profile action entry, perform the following procedure:

Note

You must first enter a profile action before you can modify it. See “Creating a Profile Action” on page 224 for more information.

1.From the main menu on the left side of the page, select the Access Control Config folder.

The Access Control Config folder expands.

225