Allied Telesis AT-S112, AT-GS950/16PS manual Associate Ports to CoS Priorities

Chapter 15: Quality of Service and Cost of Service

Associate Ports to CoS Priorities

The Port Priority values is assigned to an untagged frame at ingress for internal processing in the switch. This procedure explains how to change the default mappings of port priorities to the User Priority. This is set at the switch level. You cannot set this at the per-port level.

To change the port priority mappings, perform the following procedure.

1.From the main menu on the left side of the page, select Bridge. The Bridge folder expands.

2.From the Bridge folder, select QoS. The QoS folder expands.

3.From the QoS folder, select Port Priority.

The AT-GS950/16PS Port Priority Page page is displayed. See Figure 60 for a partial view of this page.

Figure 60. AT-GS950/16PS Port Priority Page

4.For each port whose priority you want to change, select a priority (0-7) in the User Priority column.

5.Click Apply for each port.

6.From the main menu on the left side of the page, select Save Configuration to Flash to permanently save your changes.

182