Allied Telesis AT-S112, AT-GS950/16PS manual Pinging a Remote System

Chapter 29: Pinging a Remote System

switch waits for a response before assuming that a ping has failed.

Number of Ping Requests - Specifies the number of ping requests you want the switch to perform.

4.Click Start.

5.To view the ping results, click Show Ping Results.

A sample Ping Test Results Page is displayed. See Figure 138.

Figure 138. Ping Test Results Page

The following information is displayed:

Destination IP Address - Indicates the IP address of the unit that receives the ping.

Pass - Indicates the percentage of times the ping passed.

Average Time - Indicates the time, in milliseconds, the ping was received.

6. Click Back to Ping Test to return to the Ping Test Configuration Page.

348