Allied Telesis AT-GS950/16PS, AT-S112 manual In-Profile Action, Creating an In- Profile Action

AT-GS950/16PS Switch Web Interface User’s Guide

In-Profile Action

Creating an In- Profile Action

The Create In-Profile Action page allows you to specify a Profile Action’s Permit or Deny privilege for packets in the ingress queue.

Note

A Profile Action Index is required to create an In-Profile Action. See “Creating a Profile Action” on page 224 for more information.

You can create, modify or delete an In-Profile Action by following the procedures in the following sections:

“Creating an In-Profile Action,” next

“Modifying an In-Profile Action” on page 229

“Deleting an In-Profile Action” on page 230

To create an in-profile action, perform the following procedure:

1.From the main menu on the left side of the page, select the Access Control Config folder.

The Access Control Config folder expands.

2.From the Access Control Config folder, select In-Profile Action. The Create In-Profile Action page is displayed in Figure 82.

Figure 82. Create In-Profile Action Page Example

3.Enter a number in the In-Profile Action Index field. The Index must be a unique number within the range of 1 - 65535. This field is mandatory.

227