3Com 9000 manual CON Connections, ADD Get ATM Addresses, STC Get Static and NNI Addresses, At Port

128CHAPTER 6: MANAGING NETWORK INTERFACES

Display Static ATM Display static ATM addresses registered for the specified port. This Addresses at Port command includes ATM addresses that have been entered manually via

LMA or learned addresses over Network-to-Network Interface (NNI) connection (E-IISP). This command also displays member IDs for each ATM address registered at the port.

Note that, similar to ILMI registration, each port can have multiple ATM addresses.

For more information, see “Display User Management Entities (UME)

ATM Addresses at Port” on page 124.

Command Actions

Enter the menu sequence:	(3) CON: Connections
	(1) ADD: Get ATM Addresses
	(2) STC: Get Static and NNI Addresses
	at Port
Enter a parameter at the prompt
Parameter	Format or Range
Port ID	<slot.group.port> or 0.0 for all ports
Direct access sequence:	3 1 2 [parameters]
Command Result
System action taken:	All ATM addresses registered for the specified port are
	displayed.
System message display:	Information is displayed as shown in the example.