3Com 9000 manual CoreBuilder, Switch Integrated, Fast Setup

3

INTEGRATED FAST SETUP

	This chapter describes how to use the Integrated Fast Setup procedure to
	configure the CoreBuilder® 9000 ATM Enterprise Switch, allowing it to
	function in the network.
CoreBuilder 9000	After you have physically connected the CoreBuilder 9000 ATM
ATM Enterprise	Enterprise Switch to your site network devices and power has been
Switch Integrated	applied, you must set some parameters to enable the CoreBuilder 9000
Fast Setup	ATM Enterprise Switch with its attached ATM Interface Modules to
	function in the network.
	The CoreBuilder 9000 ATM Enterprise Switch local management software
	features an Integrated Fast Setup procedure that configures the
	CoreBuilder 9000 ATM Enterprise Switch in one continuous process.
	With Integrated Fast Setup, you can set up the most important system
	parameters that you need to start working right away. The remaining
	parameters are assigned default values.
	If you are installing the ATM Switch Fabric Module and ATM Interface
	Modules at the same time, you need to perform the Integrated Fast Setup
	procedure only once; all modules will be configured.