3Com 9000 manual Statistics Command Actions, Physical statistics are reset for port

192CHAPTER 8: VIEWING STATISTICS

Reset Physical Layer Reset physical layer statistics for a specified port.

Statistics

Command Actions

Enter the menu sequence:	(4) STS: Statistics
	(1) PHY: Physical Layer
	(2) RST: Reset phys layer counters
Enter a parameter at the prompt
Parameter	Format or Range
Port ID	<slot.group.port>
	or Enter 0.0 - For all ports
Direct access sequence:	4 1 2 [parameters]
Command Result
System action taken:	Physical statistics for the switch are reset.
System message display:	Reset physical counters completed
	successfully.

Example

Enter: 4 1 2 1.1.1

The following message is displayed:

Reset physical counters completed successfully.

The physical statistics are reset for port 1.1.1.