3Com 9000 manual Write-access password is updated

52CHAPTER 5: CONFIGURING THE PLATFORM

Update Write-accessUpdate the write-access password. Enter the new password a second Password time to confirm your entry.

To accept the default password, press Enter.

Command Actions

.	(1) SYS: Platform Configuration
Enter menu sequence:
	(1) SET: Switch Setup
	(1) PAS: Password Setup
	(2) WRI: Set Write-access Password
Enter a parameter at the prompt
Parameter	Format or Range
New password	0 to 8 alphanumeric characters
New password	Enter the password exactly as you did before.
confirmation
Direct access sequence:	1 1 1 2 [parameters]
Command Result
System action taken:	The write-access password is updated.
System message display:	The password has been changed.

Example

Enter: 1 1 1 2

The following dialog is displayed. Note that the passwords themselves are not displayed.

Enter the new write password: mypassw

Enter the new write password again: mypassw

The password has been changed.

The write-access password is updated.