3Com 9000 manual LEC Connection Information Parameters

LEC Operations 301

LEC Connection Information Parameters

Table 44 shows the LEC Connection Information parameters displayed by the command.

.

Table 44 LEC Connection Information

Name	Description
LEC ID	LEC ID number.
State	Current LEC state:
	Joining—the LEC is performing Point-to-Point direct
	connection to the LES, or the LEC is sending the “join”
	request.
	ADD Party—the LES is adding the LEC to its
	￿Point-to-Multipoint distribute connection
	Operational—the client is now ready to operate.
CTRL Direct	LES member_id and the point-to-point call_id between the LES
mem_id/call_id	and the LEC
MCAST send	BUS member_id and the point-to-point call id between the
mem_id/call_id	ELAN’s BUS and the LEC
ATM Addresses	User part of the LEC ATM address.
Is Proxy	Whether the LEC is a proxy or not.

Example

Enter: 2 2 3 2 1 0

The LEC information for all LECs of the specified ELAN is displayed as follows:

LEC	State	Ctrl	Mcast	ATM addresses:	Is
id		Direct	send	User part	proxy
		mem_id/ mem_id/
		Call_id Call_id
--- -----------		---------	----------	-------------------	--------
22	Operational	1701/7766	1701/7767	8.0.4e.b.db.53.0	YES
1 Operational		1701/ 10	1701/ 43	0.c0.da.3.4e.d1.0	YES