Wireless | User Manual | |
|
|
|
|
|
|
| Item |
| Description |
| Fragment |
| Set the data packet fragmentation threshold, value can be written |
|
| between 256 and 2346 bytes. This specifies the maximum size of a | |
| Threshold |
| packet during the fragmentation of data to be transmitted. If you set |
|
|
| this value too low, it will result in bad performance |
|
|
| Set the RTS Threshold, value can be written between 0 and 2347 |
| RTS Threshold |
| bytes. When the packet size is smaller than the RTS threshold, the |
|
| wireless router will not use the RTS/CTS mechanism to send this | |
|
|
| |
|
|
| packet. |
| Beacon Interval |
| Set the Beacon Interval, value can be written between 20 and 1024 |
|
| ms. This is the interval of time that this wireless router broadcasts a | |
|
|
| beacon. A Beacon is used to synchronize the wireless network. |
|
|
| Click to select the Long Preamble or Short Preamble support on the |
| Preamble Type |
| wireless data packet transmission. The “Long Preamble” can provide |
|
| better wireless LAN compatibility while the “Short Preamble” can | |
|
|
| |
|
|
| provide better wireless LAN performance. |
| IAPP (Inter |
| Click to enable or disable the IAPP function. |
| Access Point |
|
|
| Protocol) |
|
|
| Protection |
| Protect 802.11n user priority. |
| Aggregation |
| Click to enable or disable the Aggregation function. |
| Short GI |
| Click to enable or disable the short Guard Intervals function. |
| RF Output |
| To adjust transmission power level. |
| Power |
|
|
| Apply Changes |
| Click the Apply Changes button to complete the new configuration |
|
| setting. | |
|
|
| |
| Reset |
| Click the Reset button to abort change and recover the previous |
|
| configuration setting. | |
|
|
|
23