Rosewill RNX-N400LX user manual Static DHCP Setup, Description, menu. Server mode only

Wireless RouterRNX-N400LX User Manual

Item	Description
IP Address	Fill in the IP address of LAN interfaces of this WLAN Access Point.
Subnet Mask	Fill in the subnet mask of LAN interfaces of this WLAN Access Point.
Default Gateway	Fill in the default gateway for LAN interfaces out going data packets.
DHCP	Click to select Disabled, Client or Server in different operation
	mode of wireless Access Point.
DHCP Client	Fill in the start IP address and end IP address to allocate a range of
	IP addresses; client with DHCP function set will be assigned an IP
Range
	address from the range.
Show Client	Click to open the Active DHCP Client Table window that shows the
	active clients with their assigned IP address, MAC address and time
	expired information. [Server mode only]
Static DHCP	Select enable or disable the Static DHCP function from pull-down
	menu. [Server mode only]
Set Static DHCP	Manual setup Static DHCP IP address for specific MAC address.
	[Server mode only]
Domain Name	Assign Domain Name and dispatch to DHCP clients. It is optional
	field.
802.1d Spanning	Select enable or disable the IEEE 802.1d Spanning Tree function
Tree	from pull-down menu.
Clone MAC	Fill in the MAC address that is the MAC address to be Cloned
Address
Apply Changes	Click the Apply Changes button to complete the new configuration
	setting.
Reset	Click the Reset button to abort change and recover the previous
	configuration setting.

3.411 Static DHCP Setup

30