Humidity (non-condensing) 10%～90% typical
62
Environment
WPS button
Reset Button
Power Requirements
LEDs Status
WAN: 10/100 Fast Ethernet RJ-45 x 1
LAN: 10/100 Fast Ethernet RJ-45 x 4 Physical Interface Rest button
Power Jack
WPS button (WiFi Protected Setup)
Power Status
WAN (Internet connection) 10/100Mbps LAN1~LAN4 WLAN (Wireless connection)
WPS
Power Supply: 200 to 240 VDC ± 10％ (ETSI) 100 to 120 VDC ± 10％ (FCC)
Device: 12V DC/1A
The reset button is built into the rear panel. Use this button to restore the RNX-N400LX to its factory default settings. Press for 1 second to restart the device. Continuously press for 10 seconds to restore to factory default settings.
Press the WPS on two WPS enabled devices within 120 seconds for a security-enabled wireless connection.
Temperature Range
0 to 60°C - Operating, (32°F~140°F )
146 x 100 x 24 (mm); 5.74” x 3.93” x 0.94”
Product Specification
Wireless | User Manual | |
|
|
|
|
|
|
Appendix B –
Hardware Feature
Dimensions (L x
W x H)