Rosewill RNX-N400LX user manual WAN Interface Setup - PPTP, Automatically, Manually

Wireless RouterRNX-N400LX User Manual

	implemented to close the PPPoE connection while there are no data
	sent out longer than the idle time set.
	Manual connection type means to setup the connection through the
	PPPoE protocol by clicking the Connect button manually, and
	clicking the Disconnect button manually.
Idle Time	If you select the PPPoE and Connect on Demand connection type,
	fill in the idle time for auto-disconnect function. Value can be
	between 1 and 1000 minutes.
MTU Size	Fill in the mtu size of MTU Size. The default value is 1400.
Attain DNS	Click to select getting DNS address for DHCP support.
Automatically	Please select Set DNS Manually if the DHCP support is selected.
Set DNS	Click to select getting DNS address for DHCP support.
Manually
DNS 1	Fill in the IP address of Domain Name Server 1.
DNS 2	Fill in the IP address of Domain Name Server 2.
DNS 3	Fill in the IP address of Domain Name Server 3.
Clone MAC	Fill in the MAC address that is the MAC address to be cloned.
Address
Enable uPNP	Click the checkbox to enable uPNP function.
Enable IGMP	Click the checkbox to enable IGMP Proxy.
Proxy
Enable Ping	Click the checkbox to enable WAN ICMP response.
Access on WAN
Enable Web
Server Access on	Click the checkbox to enable web configuration from WAN side.
WAN
Enable IPsec
pass through on	Click the checkbox to enable IPSec packet pass through.
VPN Connection
Enable PPTP
pass through on	Click the checkbox to enable PPTP packet pass through.
VPN Connection
Enable L2TP
pass through on	Click the checkbox to enable L2TP packet pass through.
VPN Connection
Apply Changes	Click the Apply Changes button to complete the new configuration
	setting.
Reset	Click the Reset button to abort change and recover the previous
	configuration setting.

3.424 WAN Interface Setup – PPTP

36