Rosewill RNX-N400LX Description, Port/Connector/Button, SMA Antenna Connector, Reset, WPS Button

Wireless RouterRNX-N400LXUser Manual

Off	RNX-N400LX’s WAN port is not linking
On	RNX-N400LX’s LAN port is linking
Blinking	RNX-N400LX is sending/receiving data through LAN port
Off	RNX-N400LX’s LAN port is not linking
On	Press Button to start searching
Blinking	RNX-N400LX is sending/receiving data through WAN
Off	Default – No Link

Port/Connector/Button	Description
SMA Antenna Connector	Wireless LAN Antenna connector
Reset	Push continually the reset button 5 ~ 10 seconds to reset
	the configuration parameters to factory defaults.
	Push the WPS button implementation to reduce the
WPS Button	network configuration steps, and also easy to implement
	network security.
	The RJ-45 sockets allow LAN connection through
LAN 1~4 Ports	Category 5 cables. Support auto-sensing on 10/100M speed
	and half/ full duplex; comply with IEEE 802.3/ 802.3u
	respectively.
	The RJ-45 socket allows WAN connection through a
WAN Port	Category 5 cable. Support auto-sensing on 10/100M speed
(Data that going in from	and half/ full duplex; comply with IEEE 802.3/ 802.3u
Modem)
	respectively.

8