Rosewill RNX-N400LX 3.4 TCP/IP Settings, Wireless - Schedule, LAN Interface, Configuration

Wireless RouterRNX-N400LXUser Manual

	system access capability.
Push Button	The Start PBC button provides tool to scan the wireless network. If
	any Access Point or IBSS is found, you could connect it
Configuration
	automatically when client join PBC mode.
Apply Changes	Click the Apply Changes button to complete the new configuration
	setting.
Reset	Click the Reset button to abort change and recover the previous
	configuration setting.
Current Key Info	Authentication: It shows the Authentication is opened or closed.
	Encryption: It shows the Encryption mode.
	Key: It shows the Encryption key.
Client PIN	Fill in the Client PIN Number from your Client sites.
Number

3.38 Wireless – Schedule

This section will help you set the wireless broadcast schedule. You will need to set System time before using this feature

3.4 TCP/IP Settings:

This section allows you to set your Local Network IP address and how your RNX- N400LX connects to the internet via modem.

3.41 LAN Interface

This page is used to configure the parameters for local area network that connects to the LAN ports of your WLAN Broadband Router. Here you may change the setting for IP address, subnet mask, DHCP, etc.

29