Rosewill RNX-N400LX user manual Management - Status, Description

Wireless RouterRNX-N400LX User Manual

Item	Description
Enable QoS	Click to enable the QoS function.
Automatic Uplink	Enable to allow RNX-N400LX to automatically adjust the upload
Speed	speed
Manual Uplink	If not enable automatic uplink speed, you will need to assign an
Speed (Kbps)	upload speed.
Address Type	Select what will your network be control by. Either through IP or MAC
Local IP Address	If select to control by IP, you will need to provide a range of the IP
	which you want to use QoS functions.
MAC Address	If select to control by MAC, you will need to provide MAC address
	which you want to use QoS functions.
Mode	You will have two options; either by Guaranteed	Minimum
	Bandwidth or by Restricted Maximum Bandwidth.
Bandwidth (kbps)	You can set the actual controlled bandwidth under	either the
	minimum or Maximum bandwidth.
Comments	You can put your comments here to help manage this rule.
Apply Changes	Click the Apply Changes button to complete the new configuration
	setting.
Reset	Click the Reset button to abort change and recover the previous
	configuration setting.
Delete Selected	Click to delete the selected port range that will be removed from the
	port-filtering list.
Delete All	Click to delete all the registered entries from the port-filtering list.
Reset	Click the Reset button to abort change and recover the previous
	configuration setting.

3.7 Management:

Management section helps you with overall RNX-N400LX setup including a brief overview on Status, traffic statistics, DDNS, Denial of Service and others which can help you utilizing and managing RNX-N400LX better.

3.71 Management – Status

Status shows the current status and some basic settings of the device, includes system, wireless, Ethernet LAN and WAN configuration information.

45