Rose electronic QuadraVista manual Installation, Installing the KVM station

Page 11

INSTALLATION

Installation

Please refer to the safety section first before proceeding with any installation or configuration of the QuadraVista.

Installation of the QuadraVista consists of connecting the computers and KVM workstation to the unit. The following steps can be used as a guideline for installing your QuadraVista. It is recommended that you locate the QuadraVista as close as possible to the computers being connected.

Installing the KVM station

Connect your KVM user station to the QuadraVista as shown in Figure 3. Connect a USB mouse and USB keyboard to the corresponding USB ports on QuadraVista. If a PS/2 keyboard and mouse are used, a PS/2 to USB converter must be used.

Next, connect a VGA (HD15F) or DVI monitor to the DVI-I port. If a VGA monitor is used, a VGA (HD15F) to DVI converter cable must be used.

Figure 3. KVM Installation

QUADRAVISTA INSTALLATION AND OPERATIONS MANUAL

5

 

 

Image 11
Contents QuadraVista Page Limited Warranty Declaration of Conformity Declaration of ConformityTable of Contents Figures System Introduction IntroductionFeatures Rose Electronics web site About this manual Package contentsCompatibility Product RegistrationFront View Selector buttons ModelsInstalling the KVM station InstallationInstallation CPU Connect Installing the ComputersFront Panel LEDs / Push-Button Commands CommandsChannel select window Hotkey + P Keyboard CommandsOn Screen Menu System On Screen DisplaySystem menu Main MenuHotkey System / HotKeySystem / HotMouse → ← → ← or ← → ← →Active channel Hotmouse Menu System OSD Position System Quad ModeSystem / Security System / OSD LanguageEdid Quadravista Installation and Operations Manual System / Test Pattern System / Test PatternSystem / Control System / Disable ChannelMode Mode / PiP-StartConfigure / Backup, Recall, Factory Reset ConfigureRecall Video output / Keyboard / Multi-Monitor / Edid ConsoleConsole, Video output Console / KeyboardExample Multi-Monitor Console / Multi-MonitorVideo / Video Input VideoConsole / Edid Video Brightness / Contrast Video / Brightness / ContrastHorizontal Position Video / Horizontal and Vertical positionVideo / Screen width Video / PhaseVideo / Format ComputerComputer / Mouse Computer / KeyboardComputer / Change EDID/DDC Computer / Reset PS/2Edid Programming Help Help / CommandHelp / Contact Serial Operation Serial FeaturesDCP Synchronizing Multiple Units Quadravista Installation and Operations Manual DCP/XML Feature Quadravista Installation and Operations Manual Response to the above query is DCP/XML System QueryingDCP error messages Line length maximum 38 characters Technical Support Service InformationMaintenance and Repair Safety SafetyGrounding Safety and EMC Regulatory StatementsAppendix B. Parts and cables Appendix A. SpecificationsAppendices Appendix C. Factory Defaults Section Function Default SettingAppendix D. Supported Video-In Formats Quadravista Installation and Operations Manual Page Stancliff Road