
SERIAL OPERATION
Serial Features
QuadraVista can be configured or controlled from a remote computer by connecting a serial cable from the computer’s COM port to the QuadraVista’s serial input port.
To remotely configure the QuadraVista (Display / execute the OSD features only), download the communication software from our web site at /www.rose.com/htm/download.htm in the tech support section and install it on a remote windows based computer. Next, call up the OSD from the local console and navigate to the “System, Control” section and change the DCP mode setting to “control”.
Connect a serial cable from COM1 or COM2 port on the remote Laptop or PC to the RS232 port on the rear panel of QuadraVista as shown below
Remote
Laptop or PC
| Serial |
| |
| Cable | RS 232 | |
| DB9F to RJ45M | ||
| Port | ||
| P/N | ||
|
| ||
Figure 38, Serial connections |
| ||
38 |
| QUADRAVISTA INSTALLATION AND OPERATIONS MANUAL | |
|
|
|
|