Rose electronic QuadraVista manual Mode / PiP-Start

MODE

Mode / PiP-Start

Selecting “MODE” and pressing enter displays the mode screen. Two mode selections are available, PiP and Start. The PiP features and configuration can be set-up, and the channel and mode setting on start-up.

The PiP menu allows you to change from triple to single PiP. Triple display shows the three non-active windows on the right of the screen. Single display shows only one non-active window. PiP size, zoom, and offset from the top of the screen can be set.

PiP display modes:

Triple – Displays the three non-active channels

Single – Displays one non-active channel Fixed – Permanently displays one

non-active channel

Scan – Scans non-active channels in one PiP window (scan time 1-9 sec)

Direct – Permanently displays one non-active channel. Select the desired channel to display directly.

22 QUADRAVISTA INSTALLATION AND OPERATIONS MANUAL