Rose electronic QuadraVista manual Channel select window

In the Quad mode, the channel selector window will switch active channels each time the PiP button is pressed. The channel selector window will timeout and disappear after a preset amount of non-activity. Timeout value is configured, from 1-30 seconds, using the On-Screen-Display.

Figure 5. Channel select window

The front panel push-buttons have additional features as shown below. Simultaneously press and hold for the designated time to active the feature.

Buttons 1 & 2 set the VGA resolution to 640 x 480 (Press and hold longer than 2 sec)

Buttons 3 & 4 perform a hardware reset for the video, keyboard, and mouse. (Press and hold longer than 4 sec

Buttons Quad & PiP display the OSD menu. (Press and hold longer than 1 sec)

For each of the push-button features, there is a corresponding keyboard command that will perform the same feature. Following are the keyboard commands and their features.

8 QUADRAVISTA INSTALLATION AND OPERATIONS MANUAL